“This content will educate you on the relationship and effect of Humidity, Mold and Indoor Garden.”
Humidity, air quality and mold are the major parameters that play significant roles in indoor gardening. Too high humidity will destroy plant growth and also dry air is not friendly to healthy plant growth. You have to balance this situation properly. In the situation of molds, they do well in high humidity and in the absence of direct sun-ray. They usually cover the soil because the soil is always dumping at most times and in returns affects growth of plants.
Below we are going to talk about the normal conditions where you can get the best results.
Humidity refers to the relative amount of water ( ) available in the air at a particular time. This water present in the air varies to the air temperature and the more warm the air, the greater amount of water it will hold. Every indoor plant does survive in 40 to 60 percent humidity but as a result of different reasons humidity do falls. When this occurs, plant growth tends to be retard so we need to increase the humidity level. There are numbers of methods to high the humidity. We will talk about the sequential steps that will enable us keep accurate level of humidity required.
Things needed for this:
- Get a tray made of plastic or glass.
- Marbles or Pebbles.
- Warm or cool mist humidifier.
- Small greenhouse or large aquarium.
First and foremost, mount the tray the place you want it in your room. The best position will be at the indoor garden middle. After putting your tray at the middle position, then fill it with marbles or pebbles you have gotten. That just the basic set-up required. Now begin to fill the tray with water until it reaches the pebbles surface.
Now the next stage is put the embedded plant on the pebbles. This will hold the plant nearer to the tray which is most important at this time. The next thing is to keep observing the water level and refilling the tray as water evaporates. As the water evaporates into the air, it will indirectly raise humidity because the air contains this water in its molecules.
The more the water continues to evaporate into the air, the higher the humidity, so keep positioning plants close to the tray. Make the plants surround the tray at the middle or just place the embedded plants on them. The more water they absorbed, the more positive impact it will have on them.
Now is time to place your humidifier close to your indoor garden or the embedded plants. The humidifier will add more moisture to the garden air. It depends on the type of humidifier you have as they work differently; cool mist humidifier adds cool moisture. Several plants required cool moisture and if you have those then cool mist humidifier is the type to go for”. On the other hand, warm humidifier releases hot moistures which aid your plant grows better in the atmosphere.
It is wise to position the indoor garden inside a place like the greenhouse. look for any enclosed place as a better option as this type of enclosure consistently helps to maintain the humidity always which is recommended best for plants better performance.
When adopting this technique, you have to make sure your tray is kept clean or else you will battle with problems of mold and also the humidifier should be clean for the same reson. As well, take statistics of the records of the changes in the humidity level with the aid of a hygrometer device. This will help you to track changes in humidity.
Another problem you have to deal with is mold growth. They generally grow on the soil surface and form layer which prevents the soil not to get the needed light or oxygen and your plants suffer. The major problem with molds, they grow well in favorable humidity. As an indoor garden owner, you have to keep this situation under control. Here are some listed basic things you should practice to get rid of mold problem
Keep the surrounding dry and clean. Make sure there is no too much humidification. Molds problem can easily be dealt with easily in the present of low humidity. To automatically reduce the mold problem, use a dehumidifier to control the humidity available. Getting rid of the mold would favor plants growths.
The quality of air available is another factor for your indoor garden. Conclusively, there are number of reasons why indoor air gets contaminated and affects the growth of plants. Your electronics like the computers and plus some gadgets which emit radiation are the main agents responsible for indoor air pollutant. Aside from those, there are tobacco smokes, pesticide, mold that pollute indoor air. To keep a healthier atmosphere for your indoor garden, there are natural air purifiers that help to clears the polluted air. The common Aloe Vera, Peace lily, English ivy, Boston fern, Eucalyptus etc. plants has been established to clear air effectively.
These are the common problems to face while handling indoor garden and most times, the best aqua-cultural system is also affected by them. Take the sound cautions and let your plants flourish in natural way.